I am putting the OEM muffler back onto my FZ6. I have the muffler and midpipe, as well as the bracket that holds the muffler to the tail. I don't have a single bolt or the spacer that connects the muffler to the midpipe.
Anyone have these bolts/spacers they are willing to sell?
Thanks!
I just picked up a 2007 FZ6 that has a Leo Vince Carbon catback on it. It's a bit louder than I like (yes, inserts are in), and I want to put the OEM exhaust back on.
The OEM muffler and midpipe are in great shape, as are the gaskets. Is there anything else I should know about putting the OEM...
SOLD
Selling a pair of used 2004-2006 OEM mirrors. They are used, left one has a small scuff (see pictures)
Each has a small convex attached, but those are just stick-ons.
Would like to get $70 + shipping
Anyone else notice this?
This summer I would like to make a pass at the local 1320 and a solid launch is something I rarely subject the bike too! That said I would hate to grenade it for entertainment!
What kits have been used and which have steel backed frictions vs oem aluminum which we've...
aluminum
backed
bike
clutch
ebc
entertainment
frictions
full
grenade
hate
kits
launch
local
make
notice
oem
oil
pass
rarely
solid
steel
subject
summer
synthetic
wha
Hey Y’all!
It’s time for the naked conversation, and I would love everyone’s insights and help. I’m trying to do this all on my own, so if you have any tips or any solid references, lemme know. The short of why I'm undertaking a naked look (besides the fact that it's awesome!) is because a...
Hey everyone,
I'm slimming down the big list and consolidating some things together
Here's going to be what's up for grabs (everything is OEM from my 2009, black, FZ6 S2 unless stated):
- TWO Brothers Carbon Fiber Slip-on Exhaust w/ Arrow de-cat midpipe ($700 w/ shipping)
The rest of...
I've got a pair of OEM levers and an OEM front sprocket (16t) that I don't need.
I know the usual recommendation is to change sprockets and chains as a new set, but this one doesn't look bad. From my logs, I replaced it for a 15t after 7,000 miles. If someone wants it to save a few bucks, I'm...
The wind knocked my bike down this winter and the stock handlebars I have are slightly bent. Also the front stay seems to be a little bent.
Does anyone have any of these? Thanks guys!
Per a thread that had a regular automotive bulb installed (and shorted out), below is a picture of the OEM, THREE POST BULB.
It is slightly brighter and considerably more durable. IMO, something to consider especially with only one bulb on the rear of the FZ6..
Hi guys,
Only got my FZ6 -2004 - faired a few weeks ago and am loving it! I want it to be a dual purpose motorcycle, acting as a English B road carver when I'm out with the guys, and a pack horse luggage carrier when I go 2-up riding with my wife and do some short haul touring. It seems to...
OEM PARTS FOR SALE!!!!
I have a few items remaining. The lever and hugger price INCLUDES shipping cost. The swinger will depend on your location.
Levers: $21
Rear Hugger: $35
Swing arm (adjusters are included but not in the picture): $15
I do have axles for the swinger. If necessary, we can...
So this evening this weird thing happened on my way home..... Im not sure but its this number that not too many have seen on their dash before.
ANYWAYS BlahBlahBlahBlah all kidding aside I *knock on wood*** have done:
Preventative:
Head bearings
1 chain (never replaced...
Silly question: is there any benefit from an OEM crush washer over a similar-sized crush washer from, say, NAPA?
I drained my coolant (came out looking almost like oil - overdue!), and I can't seem to find the OEM crush washer I ordered a while back. I can get another one Tuesday, or I can...
Install of a black powder coat 48 tooth Sunstar sprocket is pretty much the last Silver part on the bike short of the headers, mid-pipe and fork stanchion tubes... All the rest is Black Powder Coat. Not for everyone, but I like it!
I may need a new project now! :D
Yes, a 48 will fit w/2"...