Sadness... Just typed a novel, browser hung and its gone....
Absolutely!!! Wires strands can break and wires jacket looks fine.
Do you own test lamp or multimeter? We really need this Side Stand thing closed so we know its not the issue.
19 - Open circuit is detected in the input lead from the sidestand switch to the ECU.
With the left pod cover off, Starter circuit Relay unplugged, connect Test lamp to 12V + POS side of battery. Follow the BLUE w/Black trace wire into the Starter Relay connector. Connect test lamp. With Side Stand up, LAMP should be on. WIGGLE WIRE TO SIDE STAND and all along frame rail to Relay. LIGHT SHOULD REMAIN ON.
Can you do this? You did clean and inspect the switch itself yes?
Absolutely!!! Wires strands can break and wires jacket looks fine.
Do you own test lamp or multimeter? We really need this Side Stand thing closed so we know its not the issue.
19 - Open circuit is detected in the input lead from the sidestand switch to the ECU.
With the left pod cover off, Starter circuit Relay unplugged, connect Test lamp to 12V + POS side of battery. Follow the BLUE w/Black trace wire into the Starter Relay connector. Connect test lamp. With Side Stand up, LAMP should be on. WIGGLE WIRE TO SIDE STAND and all along frame rail to Relay. LIGHT SHOULD REMAIN ON.
Can you do this? You did clean and inspect the switch itself yes?