Sith Lord
Junior Member
I realised, like most, the the angle of the FZ6 bars isn't ideal, so after much debate on what sort of bar to go for, I decided on the FZ1 item. Part # 2D1-26111-01 for those interested. Install went real easy. About an hour and a half. No probs at all. Had a panic for a moment when the switch gear hit the tank, then realised I didn't have the bars angled right.
When looking into these bars, I was hoping to find a thread with accurate before and after shots. I couldn't, so I decided to set up the Camera and Tripod and take some shots before and after WITHOUT the camera moving an inch. Unfortunately during insatllation I moved the bike :spank: Oh well. I got it back pretty close....
Here's a couple of side on shots comparing the two. In these pics, and the next post you can really see the difference in pullback angle and downward angle of the FZ6 bars.
Unfortunately it has been absolete pissing down all weekend, so haven't been able to take it for a spin yet.
When looking into these bars, I was hoping to find a thread with accurate before and after shots. I couldn't, so I decided to set up the Camera and Tripod and take some shots before and after WITHOUT the camera moving an inch. Unfortunately during insatllation I moved the bike :spank: Oh well. I got it back pretty close....
Here's a couple of side on shots comparing the two. In these pics, and the next post you can really see the difference in pullback angle and downward angle of the FZ6 bars.
Unfortunately it has been absolete pissing down all weekend, so haven't been able to take it for a spin yet.