cambjones
Junior Member
Hi All..
I recently lost one of the key to my FZ6N '05 so I had to buy a new key... £30... ouch..
I thought I could reprogram it myself using the red key and the bike and I tried a process that Youngy found somewhere posted below... but it didn't seem to work with this new key.
Has anyone had any success programming a new key to their bike...
The place that sold me the key for £30 wants to charge me another £30 to program the chip... that is mental...
any help/ideas much appreciated!
1. Insert the red key into the ignition and turn it to "ON". The immobilizer indicator light should come on for 1 second and then go off.
2. With the red key still in the ignition, start the engine.
3. Shut off the engine and remove the red key. The immobilizer indicator light should start to blink after 30 seconds.
4. Insert the red key into the ignition and turn it to "ON", then "OFF" and then remove the key within 5 seconds.
5. Insert the black key into the ignition and turn it to "ON" within 5 seconds.
6. While the immobilizer indicator light is flashing, turn the black key to "OFF" and then remove the key.
7. Wait for the immobilizer indicator light to stop flashing. It should stop 5 seconds after you remove the black key.
8. If everything went OK, then you can use the black key to start the engine.
I recently lost one of the key to my FZ6N '05 so I had to buy a new key... £30... ouch..
I thought I could reprogram it myself using the red key and the bike and I tried a process that Youngy found somewhere posted below... but it didn't seem to work with this new key.
Has anyone had any success programming a new key to their bike...
The place that sold me the key for £30 wants to charge me another £30 to program the chip... that is mental...
any help/ideas much appreciated!
1. Insert the red key into the ignition and turn it to "ON". The immobilizer indicator light should come on for 1 second and then go off.
2. With the red key still in the ignition, start the engine.
3. Shut off the engine and remove the red key. The immobilizer indicator light should start to blink after 30 seconds.
4. Insert the red key into the ignition and turn it to "ON", then "OFF" and then remove the key within 5 seconds.
5. Insert the black key into the ignition and turn it to "ON" within 5 seconds.
6. While the immobilizer indicator light is flashing, turn the black key to "OFF" and then remove the key.
7. Wait for the immobilizer indicator light to stop flashing. It should stop 5 seconds after you remove the black key.
8. If everything went OK, then you can use the black key to start the engine.