cap

Hi all, for people who need a frame cap I ordered and fitted 45mm plastic tube cap with great success, its only £1 free postage uk and they fit the right hand side hole nicely just need pushing in a bit and they stay there and I think look miles better than the hole and nut even though its...

worried i may have head gasket leak. a bit back i was low on coolant, so decided to change the radiator cap which looked like the seals had gone (OEM). I changed it to an after market 1.6 bar high pressure cap. Then a bit later, my coolant reservoir developed cracks, I replaced the reservoir...

recent relevant service: replaced radiator cap with 1.6 bar aftermarket cap March 2017 radiator coolant flush 3 weeks ago I was doing an oil change and it went pretty normally, but after inspecting my bike i noticed a small puddle of coolant under the bike near the kick stand (left...

I went out for a short cruse today, and when I cam back to my garage I noticed what looked like coolant leaking form the cap. when cold the radiator is filled to the cap. I little to much I feel. when the bike got hot it leaked through the cap is it just as simple as take some coolant out or...

I have a used GPI radiator for sale that is in decent condition. Used it for about 200 miles. The only problem I had was that the filling flange is slightly thinner than normal so you have to bend the cap to get it to seal properly. Also, the threaded fitting for the overflow line is a bit large...

Hi all, my stock gas cap broke and was letting water in the tank so I want to replace it. I bought a cheap cap off ebay, but it didn't have a gasket. I haven't been able to find a gasket to fit the one i bought. Looking at other gas caps I'm having a hard time finding any that come with gaskets...

When I fill up with petrol (gas) and I open the filler cap I find that water has filled the area between the opening to the tank and the ring around the filler cap. My bike is stood outside at home and this happens when there has been a lot of rain. More recently I fill up with the bike on the...

I lost my Fz6 Oil cap while riding. I called a couple Yamaha dealers and none of them have it in stock. I was wondering if anyone knows whether any other makes use the same size oil caps. Honda, Kawasaki, Suzuki etc? I am referring to this part...

Hi, I need help with the fuel tank filler cap breather system. I previously thought I had an oil leak, as there were small puddles on the ground under centre stand. Now looks like this deposit is coming from the fuel tank breather pipe. In warm weather fumes can be seen coming from the pipe...

Afternoon all, I recently fitted an aftermarket keyless fuel cap, the CNC type from Road and Race (link to pictures of the same cap on eBay), installation was straight forward enough; however when I open the cap to refuel I get a burble and splutter of fuel splashing up. I reused the...

I get PMs wanting details about fork stuff, so while I have these things here, I gathered the following. In short, there is nothing from the R6 03-04 (R6S 06-09) standard fork that fits the FZ6. The caps have a different pitch thread, the springs are 250 mm R6 vs 350 FZ. That's not to say...

During my last couple of fill ups I've noticed water puddled around the neck of the gas tank filler opening. Enough that if I'm not careful it spills into the tank. No isssues yet, but I suspect it will lead to a problem before long. I've been adding a little 'dry gas' to the petro to help...