forks

  1. C

    2006 Yamaha FZ6 was lowered by previous owner, how to put back to stock or even make it a bit taller

    I am quite tall and the bike was lowered. What is the technique used to lower the rear suspension? I want to remove whatever it is. Am I likely to need an original part, or is the lowering link setup just an add-on that can be removed and put back to stock without buying some original part that...
  2. S

    The last person in the world to finally do an R6 fork swap...

    Hi all, I bought the R6 forks and brakes from Tom here on the forum. They came with R6 calipers, axle and shims. The forks were just rebuilt with new seals and had 1kg springs installed, which are perfect for my fat self (220lbs). I then spent over a month drooling over the parts because...
  3. K

    2006 Yamaha FZ6 Forks

    Hey guys, I am trying to rebuild my FZ6. The bike needs new forks along with several other minor/cosmetic parts, but I was wondering what forks would fit this bike. I have heard R6 forks can be used but is there anything needed to go along with that switch or do they fit right on..? Or would it...
  4. trepetti

    First ride with the R6 forks on my 05 ------- WOW

    So for a long time my riding pals have been telling me how different the bike is with R6 forks. Words like 'more planted in the corners', 'the best mod ever for the FZ6', and stuff like that. I figured they were better, but as time passed I wondered if my expectations had grown bigger than what...
  5. fz6bk

    R6 Fork Spacers

    I PMed dako81--hoping he responds. If not, does anyone have the spacers for the R6 forks? Thanks!
  6. trepetti

    Need pictures of front fender on S1 with R6 forks

    I am gathering the parts for my upcoming R6 fork swap on my 05, and I'd like to see how to mount the dako81 fender adapters. Can someone who has done this swap post some pictures of the S1 fender on the R6 forks? Thanks
  7. Stephen ingham

    fork seal replacement help

    hi guys, I noticed the other day whilst cleaning my bike that the fork dust seal seems to be perishing, although there doesnt seem to be any oil leakage, so after a little research I decided to order the main seal and the dust seal and am gunna replace them on both forks. My question is what...
  8. MattR302

    R6 forks, axle, spacers/adapters for 07-09

    SOLD! Everything you need to upgrade the forks for a Gen 2. Forks from a 03/04 R6 (it took me buying a few sets on eBay to actually get a good straight set) I replaced the seals and the oil last spring, about 1500 miles on them since. I had the axle spacers (stainless steel) and the fender...
  9. ltdillard

    Warped front fork washer/guide?

    Greetings. 2007 FZ6, stock front end. I tore down my front forks to replace the seals and and noticed that the large washer (#12 in Service manual diagram on page 4-65; or "upper cover guide" part number 4TX-23115-00-00) of one side is different than the other. I'm pretty sure they ought...
  10. zixaq

    FZ6 buddy in my hood? (San Francisco)

    Just curious if you're in here somewhere. Saw a blue 2004/2005 FZ6 with R6 forks and a Corbin seat a few blocks from my house in the Haight yesterday.
  11. B

    WTB Forks or R6 conversion forks for '07 FZ6

    Looking to buy a good set of forks that fit my '07 FZ6 can be stockers or a complete R6 swap. Thanks!
  12. Paulie Myrus

    Could this be the holy grail of fork upgrade!!

    Hey folks, after months of looking at race tec springs emulators etc.. plus lots of other brands! I also considered old R6 forks. I was chatting to a suspension specialist in Dublin Ireland and he mentioned "had I not heard of" Andreani cartridge forks for my FZ6. I didn't think ANYONE made...
  13. B

    How did I mess up rebuilding my forks?

    I rebuilt my forks mostly to put stiffer springs in. I installed 1kg racetech springs. I used all balls fork seals and dust seals. Everything was spotlessly clean before being assembled. I pressed the seals in with an appropriately sized fork seal installation tool. I filled the forks carefully...
  14. R

    Handlebar Upgrade Questions

    As I prepare for my upcoming upgrade spree I wanted to get some feedback on handlebars. I purchased the bike with 1" Pro Taper bar risers and aluminum handle bars, and I'm not a big fan. They may have fit the previous owner well but feel too wide for me. This problem may be compounded...
  15. Puttin Along

    2005 SV 1000 w/ GSXR 750 front end 12,800 miles $4,000

    Not even 13,xxx miles and very clean, never down. - 2007 GSX-R750 USD forks and radial brakes (forks rebuilt by Traxxion Dynamics in Canton, GA) - 2006 GSX-R1000 front fender - 2005 GSX-R600 top triple clamp (with correctly modified center-bore) - Holeshot Performance exhaust canisters w/...
  16. Giovanottojules

    2003 r6 fender on the 2005 fz6 forks?

    2003 R6 FENDER ON THE 2005 FZ6 FORKS? CAN IT BE DONE? I don't want to swap to R6 forks. Please let me know. I believe they are the same mounting points although the forks are not exactly the same, but similar. Clearance issues also? Its only for looks. Thanks.
  17. zixaq

    Forks, axle, brakes from S1

    Stock forks $50+shipping (note these have the silver fork legs from 2004/05 bikes) Front brake calipers, includes lines but no MC ($20) Front axle Front wheel spacers Rear shock spring ($35 + shipping, or $75 with RT spring installed) Racetech shock spring separately (16 kg/mm): $50
  18. zixaq

    RaceTech Springs 0.95 kg with spacers

    As noted, I've got a set of RT springs for the FZ6 forks. Less than 6 months old. Good for riders between about 215-250 lbs, lighter if you ride really aggressively or have dropped the front a bit. Part: FRSP S3732095 (36.7x34.5x315 .95kg) Includes spacers cut for my weight (one spacer is...
  19. K

    For Sale : Numerous Upgrade Parts - Top Sellerie Seat, R6 Forks, Penske Shock, Scorpion pipes, Belly

    I can get pictures later but for now here is what I have : R6s forks (Came off a 2007) - Comes with mounting kit for S2 models, Previous owner told me they were rebuilt in the last two years with low miles - cannot attest to that, but they are leak free and function flawlessly $350 OBO for...
  20. zixaq

    Feeler/price check: Front Calipers, Forks, RT .95 Springs

    Now that I've got my R6 forks on, I'll probably sell off the original parts. While I don't have time right now to get pictures taken to post up on CL/ebay, I thought I'd post up here and see if anyone wanted to call dibs. I'm also curious for those who have sold these parts, what you were able...
Top