dgafjoey
Junior Member
Just purchased a flasher relay and it works great, much better and cheaper than having to individualy wire in a resistor to each signal light, I couldnt find any directions so I figured i'd help someone else out if they were electronically retarded like I am.
Step 1, Remove left fairing near clutch,
Step 2, Locate the OEM flasher relay.(the little black box with a rubber hanging piece)
Step 3, Unplug it and simply plug in the new one, use the old rubber piece to mount the new one to the same spot like so
Step 4, Test everything and if it all went well your signals should flash normally now, hope this helped at least one person!
I picked mine up at cyclegear down the street but you can also get one here for the same price. Welcome to CustomLED.com - the home of cutting edge motorcycle LED products.
Step 1, Remove left fairing near clutch,
Step 2, Locate the OEM flasher relay.(the little black box with a rubber hanging piece)
Step 3, Unplug it and simply plug in the new one, use the old rubber piece to mount the new one to the same spot like so
Step 4, Test everything and if it all went well your signals should flash normally now, hope this helped at least one person!
I picked mine up at cyclegear down the street but you can also get one here for the same price. Welcome to CustomLED.com - the home of cutting edge motorcycle LED products.