GREGLOUS
Junior Member
Rear caliper/brake issue AFTER SWING ARM SWAP
Hey guys! So, I recently updated my 04' with an 07' swinger. Everything went great -- until I reassembled my rear brakes. My rear brake is dragging. When the bike is on the center stand I am lucky to get 1/2 turn. I have already disassembled the caliper and cleaned/greased. Also, I have measured for alignment error. Neither of these produced any positive results. I am still dragging Do any of you fellas have any suggestions?
I should also add that I am not getting the best stopping power when engaging the brake. It's actually pretty weak despite the dragging.
Hey guys! So, I recently updated my 04' with an 07' swinger. Everything went great -- until I reassembled my rear brakes. My rear brake is dragging. When the bike is on the center stand I am lucky to get 1/2 turn. I have already disassembled the caliper and cleaned/greased. Also, I have measured for alignment error. Neither of these produced any positive results. I am still dragging Do any of you fellas have any suggestions?
I should also add that I am not getting the best stopping power when engaging the brake. It's actually pretty weak despite the dragging.
Last edited: