• Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.

wires

  1. H

    Does Fz8 ABS Meter can be use on Fz6 S2 ABS

    I have an FZ6 S2 NAHG, the speedometer appears and flashing the error Er_1, Er_2. (Link attached) Following the service manual, I checked the wire connection from Speedometer to ECU and ít's seemed the wires does not short or open. The voltage output in of 2 wires from ECU (yellow-black) is...
  2. P

    Fz6 immobilized problem

    I'm not new to the group but new to interaction, I have had my fz6 now for about 6 years (see attached pic) and have loved every minute of it, However some local hoody tried to Nick it and has cut through the immobiliser wires by the ignition, they can't be fixed nothing there too solder too...
  3. M

    left front turn signal with wires, 2006 FZ6

    Looking for a left front turn signal housing with wires and stock well, everything. looks like I can only order the housing without wires from parts places. Need it for my sons bike. Wires are screwed up and I need the whole unit. Any help is appreciated. Thank you, Mr Matt
  4. M

    where to purchase a left front turn signal with wires?

    I have been looking at Partzilla and it appears as though the housing is available but not the wire which is what I need. I purchased a 2006 FZ6 for my son that was dropped at some point by a previous owner. They thought is was a relay problem. I checked and by process of elimination the left...
  5. XpL0d3r

    New Here... Un-doing the Previous Owners "Mods"

    Hey all, Last August, I picked up a '09 FZ6R with just over 2000 miles on her! The previous owner bought it in the spring, but being 6' 5", wanted something bigger and got a Harley. So he put 13 miles on it in 5 months. Up for sale it went on Craigslist, and within two days and a test drive...
  6. P

    Best way to extend wires for rear turn signals?

    I'm a bit of an amateur when it comes to mechanical/electrical work, but anyways---have to learn sometime. Some of you may know that installing the Givi PLX360 side cases requires the turn signals to be moved backwards, and this is a problem because the wiring needs to be elongated...
  7. C

    How to replace license plate with two bros f/e kit

    As the title says. How do you do this?? I just got a new license plate because my old one got bent. I went down to put it on and find I can't get the old one off by simply unscrewing the bolts behind it! Please don't tell me I have to start unattaching wires and zip ties. I thought the 2 little...
  8. man@venture

    Custom fender eliminator. Home made, mostly FREE :)

    So I was feeling inspired and thought I would avoid spending $$$ on a fender eliminator by making my very own. Mostly free because I did pay for the parts I used but a long time ago and never used them for the intended purpose anyway.... I will start by saying, If you like this idea and want to...
  9. C

    Help with connections

    im in the process of streetfightering a 2006 fz6 and also installing a clear taillight. So i removed the side panels and took off the tail. But i did not notice where all the wires in the left side panel are suppose to connect to. I have the two plugs that go to the turn signals, and two plugs...
  10. IAMJUSTIFYD

    Where did you put your ballast?

    Have some HID installed and love them! I had the wires in a bad spot when I first did them and they were getting pulled on and lost connection with the relay. Got a new relay and moved the wires. Nothing is pulling on them but after a few months it is losing connection again. I have it on the...
  11. S

    Where to tap into blinker circuit for alarm?

    Guys, I've got an alarm system for my bike that should be wired up to the blinker signals. The alarm has (among other) two yellow wires coming out of it, which should be connected to the dark green, and brown blinker wires (as shown on...
  12. C

    configuration of the panel wires ( 16-pin )

    Good afternoon , I'm looking for the configuration of the panel wires ( 16-pin ) FZ6N . 2009 need to know the function of each wire, example- pin 1 12v in pin 2 neutral ..... someone help me ..
  13. H

    Tailight is out

    I've had a couple people tell me that my tailight is out but the brake light works on my 2007 FZ6. I ordered an Integrated MotoDynamic light and took everything apart today to install and see why the tail light is out. I plugged the new light in and it was fine. When I move it the running light...
  14. S

    Where is my ground?

    I'm looking into buying a new headlight and I can't seem to find where the ground is. Currently there's two wires going from the high beam and two wires going from the low beam. I've attached a picture
  15. R

    Help finding O2 sensor connector (PC V)

    Hi All, I have an 06 (blue) that I bought used about a year ago. Great bike. Thanks to this group, I did a couple of mods over the summer: 1) PC V 2) Scorpion exhaust When I installed these items, I disconnected what I thought was the 02 sensor under the tank. However, during a...
  16. C

    Stator issues

    Had a grounded stator earlier this summer. removed the stator to inspect and found some of the epoxy on the steel tabs was broken and starting to deteriorate as well. found a spot where wires grounded and wire coating was burned pretty good. spent a bit of time cleaning it up, managed to...
Back
Top