high

HI everyone, new to the forum, just bought a FZ6, second one I've owned, however this one came with a little plastic black wired into the high beam headlight. It has the letters EP on the cover. The bike appears to have stock headlight bulbs and turn signals. Anyone have any ideas? TIA

Hey everyone, I've tried researching this already and came across a few good posts, but nothing that addressed my issue, so I'm either not searching for the right terms or I'm the only idiot with this problem haha. Bought a used 2007 FZ6. It came with a Street Triple style of dual headlight...

I was on a regular ride on my 09 FZ6 and I had the high beam on as well as the running light. Everything was fine (both were functioning). When I stopped (<5 min later), I noted that the highbeam indicator was off and I hadn't turned it off. Sure enough, flicked the switch and it never came on...

Hi all, Can anyone help me identify the part number for this: I'm about to do the headlight conversion to naked but as I live in the UK I would like to keep the small running lights. I've searched the internet high and low but I cannot really find any information on this little part...

Hi all, I'm going to be replacing my clutch this weekend and decided to go with the KG clutch because I have had nothing but good luck with them in my other bikes. After recieving the clutch I noticed that all the clutch plates and are the same with one not being bigger. Also all the friction...

I'm thinking about replacing the stock grips with something with maybe thicker and softer rubber to give a little more cushion and damp some of the high frequency vibes. Anyone have an aftermarket grip set that you'd recommend?

So after much toying around with making a mount for the lights I finally welded one up and mounted the lights. I still have to adjust them more and when i finish that I will work on the rest of it. So far here is what I got done: This is the look right now with the wires tucked and zip tied...

Hey everyone, as the title says my high beam indicator has started flickering whenever I give my fz6 throttle. It's been sitting a while since I've been at college 2 hours away and this is the first time I've noticed this happen. Anyone know what could potentially cause this? I'd like to try and...

Hello, I am a new FZ6 owner/motorcycle rider in general and I'm having an issue with my bike that I don't exactly know how to fix. A friend of mine (the previous owner of this bike) suggested that I post here about it and see if one of y'all can help me out. So, yesterday I was out with my...

Like the title says my headlight keeps burning out. I've gone through three bulbs in the last three weeks of riding. It'll burn up the low beam and then I'll switch to high beam and that'll work for awhile before the high beam goes out as well!!! My bike is a naked conversion using the LSL...

So I just finished installing my naked kit off of eBay on my fz6. I used the high beam bulb from the old headlights and took one of the wires out of the high beam plug in and put it in the low beam plug in allowing me to use the high and low beam switch. While I was riding around my neighborhood...

Hi On a longer ride the other day, my head lights stopped working. Here is whats going on: -There is no reactions from the lights on high/low beam using the switch. -But when i press the high beam "flashing" button, one of the high beams turn on! (as long as i press it in.) -Both front...

Hey guys, Rode my bike after having it sit around all winter (a few short rides here and there around the block) and I noticed that the blue high beam indicator light stopped working. The high beams function just fine as they did before winter, but the light doesn't come on. I did have to...

While riding my high bean indicator comes on and off by itself. When its off the switch works and when it turns on by itself, if i rock the switch on and back off it stays on till it decides to turn back off. I assume the vibration has something to do with it. Also, I have not ridden at night...

I realize that most automobiles have coolant temperature gauges that are "rigged" in the sense that they show the same position for a decent range of operating temperatures so that people don't think there's a problem when they see it go up and down. Obviously, the FZ6 does not have that. Since...

I'm looking into buying a new headlight and I can't seem to find where the ground is. Currently there's two wires going from the high beam and two wires going from the low beam. I've attached a picture

So my problem is that since I bought this bike second hand I have had to replace the headlight globe twice as the high and/or low beam burn out almost instantly and now recently the high beam light icon on the dash has stopped illuminating. Also it's had a check engine light on for some...

Something I noticed this weekend. I took the Fz out for a quick spin on Sunday and I just happened to switch to the air temperature display and was shocked that it was reather high. As I was cruising it was anywhere between 109 and 113 degrees F. I know that its usually a little bit...