swingarm

My last 2 mods were R6 forks and an S2 swingarm, so I have some parts I won't be needing. 1 - S1 swingarm, $100. Includes front pivot, wheel axle, rubber chain guide, adjusters and end caps. Normal wear and tear, with the exception of small scratched area on top left (sprocket side)...

Hi! I have a problem with my swingarm, and want to change to the earlier model (silver with adjusters at the rear). My question is, will it fit? I've checked as much as i can, and it does look like a straight swap. Any help would be great.

As i read the other bearing thread, i would like to ask, did you ever change swingarm bearings. I plan to change my S1 swingarm with an upgraded S2 one. I bought it from ebay Germany with 40k km on but looks perfect. Checked bearings with hand, and they look ok to me. Meantime i have already...

I got 45k miles on my original chain and sprockets. When I replaced with OEM chain and sprockets I was able to get a Master link from Yamaha dealer so that I could install the chain without removing the swingarm. Now, 25k miles since, my chain started clunking like it was wore out. Since...

Sold thanks

For sale is this excellent condition set of swingarm pivot plugs; Natural aluminum finish. Forum member dako81 was fabricating these back in the early days of the FZ6; great quality product! Not many of these kicking around these days. Asking $50 (Price includes shipping to the lower 48...

Hello! I'm on an 06, with the old style, box section swingarm. Riding all year I have an issue with an accumulation of "goo" in the chain adjusters, causing everything to bind up for chain adjustments. At the minute I have to take the end caps off the swing arm, swill the goo out, have a good...

After out riding with a buddy and seeing how well his axle sliders performed in a low speed crash, I am trying to get the rear swingarm/axle slider from Motovation USA. Problem: Motovation discontinued the kit for the 2004-2006 FZ6 so they are no longer available. Possible solution: their...

I searched around for a while for a way to add swing arm spools. I didn't want the through the axle ones because I wanted to be able to use it to work on the rear wheel. I ended up buying one and then replacing the bolts with longer ones and drilling through the swing arm. Here is a pic.

No Longer for Sale Swingarm is in good condition with a few cosmetic blemishes from use over the years; Photos should tell the complete story. Perfect working condition. Comes with everything needed to install on a 04-06 model. These do not come around often so scoop it up while you can...

Just bought the swingarm from an S2 that was professionally bead-blasted and primed to a flat gray. Have found the proper paint code to have it re-painted Yamaha Silver to match the 04-06 models [ColorRite Yamaha 0895 Silver #8 (S8) Frame Color]. My question is, how much paint do I need in...

SOLD!! 06-30-2011 A much coveted, Gen II Swing-arm with rear axle, adjuster blocks, seals, bearings, and chain guard: Ready to bolt on to an 04' - 06' Model! The part is in good condition with only normal wear from road debris. The areas which show wear (Mainly the top section and area to the...

I am considering purchasing some swingarm and axle sliders. For those with swingarm and axle sliders, particularly those from Motovation, do you know if they keep water from getting into the swingarm or front wheel axle? Do they allow water to seep in and pool there? That would be bad. I...