axle

SOLD! Everything you need to upgrade the forks for a Gen 2. Forks from a 03/04 R6 (it took me buying a few sets on eBay to actually get a good straight set) I replaced the seals and the oil last spring, about 1500 miles on them since. I had the axle spacers (stainless steel) and the fender...

so I took bike to shop to get new rear tire, and they tightened the chain too tight, but I know the procedure and its hasn't been too big of an issue, so I decided to fix at home. Here is the issue: I have an impact wrench 425 ft-lbs of force, when I try to undo the axle bolt, it spins, so I...

For sale: R6s fork, spacer kit, axle and axle nut. $350 + shipping. Note, the spacer kit is missing one of the bolts that holds the fender on. It rattled out on me, but the fender was fine without it. You can pick up a replacement at your local hardware store.

I had my chain replaced recently, by a mechanic. As I drove it afterward, it made a whining sound that got worse with speed. I wound up driving about 50 miles on it, this way, before I decided it wasn't just the new chain that was noisy, but rather, that the chain tension was too high. I...

No longer needed

hi guys, apologies if this seems like a daft post, but I could do with a little help and clarification if possible? today I thought I would lube my chain and once on the paddock stand noticed that the chain was a little on the slack side so I decided I would adjust it. so I undid the large...

Bought a 2005 FZ6 about three weeks ago. Took it to my local/independent mechanic, who discovered that whoever put the rear wheel on last, tightened down the axle out of alignment, then cross-threaded the axle nut on, and then forced it (likely with an impact wrench). He had to cut the nut...

Stock forks $50+shipping (note these have the silver fork legs from 2004/05 bikes) Front brake calipers, includes lines but no MC ($20) Front axle Front wheel spacers Rear shock spring ($35 + shipping, or $75 with RT spring installed) Racetech shock spring separately (16 kg/mm): $50

So I finally got my R6 forks installed, and I have parts left over for another full set. (Long story short, I had some bad luck buying forks online). The parts I have for sale I know are good, I'm a mechanical engineer and checked the inner tubes on V-blocks with an indicator in my works...

Sold! For sale is the set of rear axle sliders for years 2007-2009 models. Some small marks from using the rear stand but otherwise in great shape. Asking $30 o.b.o+ Shipping <- lowered to $15 + Shipping! Please let me know if have any questions. Thank you! Scott [email protected] Photos:

Hello! I have a front axle and included axle nut from a 2006 FZ6. pay shipping and it's yours!

my front sprocket slipped off the axle, and ground off the threads on the drive axle, so i need a new one. i wanted to know if this r6 transmission part could be used as a replacement. if i understand the part number scheme, it looks like it should work. a lot of money will be going to labor to...

I finally did the R6 fork conversion mod and am absolutely LOVING it. So now I have my stock goodies up for sale. Forks - $175 Calipers - $40 Axle with spacers and pinch bolt - $8 Contact me for shipping prices. The left fork was starting to leak some oil before I did the swap. I...

Hey guys, I have an 2006 FZ6 and I went ahead and got R6S forks, axle, brakes, and spacers (Made by Dako81). I thought this would be a quick unbolt, swap, and bolt, it turned out to be much more... The wheel doesn't fit.... with the wheel and axle installed I still have a 5-8mm gap between...

So I'm trying to do the R6 fork mod and I got the spacers from dako81 and they looked awesome. I got the forks on and calipers swapped over only to find the spacers not being big enough. With the wheel and axle installed I still have a 5-8mm gap between the spacer and inside edge of the fork. I...

A slight hum comes from my front tire at 40-55mph. Also when the bike is on the center stand and I try to spin the wheel it will but it stops rotating fairly quickly. Shouldn't it spin freely? How much do you suppose a shop would charge to replace the bearings or is this something I should do...

Just got a brand new Pilot Road 4 front wheel - can't wait to ride again! Now in the middle of reinstalling front wheel between front forks... Everything seems simple enough. I have fitted everything except "front wheel axle pinch bolt" (look at page 4-1 in the 2004 service manual). I am...

Sold! (06-04-2015) Just as the title states: Set of near new condition front axle sliders. The part number states that these are for 2007+ model years but, I am fairly certain that it will fit all years (2004-2009) as the axle is the same for all years. Motovation Front Axle Sliders Part...

Hello! I'm on an 06, with the old style, box section swingarm. Riding all year I have an issue with an accumulation of "goo" in the chain adjusters, causing everything to bind up for chain adjustments. At the minute I have to take the end caps off the swing arm, swill the goo out, have a good...

I had a new set of tires put on a few weeks back and just noticed that the mechanic put the rear axle nut onto the right side instead of the left. Can this have any negative effects on the axle or spacing on either side or is it safe to leave as is?